We supply Neodymium magnets with a domed profile. Flat bottom surface with a rounded, dome-shaped top and a central through-hole. The flat bottom provides stable mounting. The smooth domed top eliminates sharp edges. And the through-hole allows for sewing, pinning, or screw attachment. This profile is designed for exposed applications where the magnet is visible or touched: – Closures on clothing, leather goods, luxury packaging, and tactile interface points. The rounded surface prevents snagging. And provides a finished appearance compared to standard flat-faced ring magnets. The “Ergonomic” Advantage Designed for Touch & Safety: Standard magnets have sharp edges that can scratch skin, cut fabric, or chip easily. Snag-Free Profile: – The domed top allows fabric to slide over the magnet without catching. – This is critical for magnetic clasps in fashion and bags. Chip Resistance: – There are no sharp corners on the outer diameter. – This shape is exceptionally durable against impact. – It is safe for high-use consumer products. Self-Centering Feel: – When used as a mating pair, two domed magnets provide a satisfying “self-centering” tactile feel when they snap together. Technical Geometry: Defining the Curve Please define the cross-section to manufacture it correctly. To quote this accurately, we categorize the shape features: – The Base: Completely flat (for gluing or resting against a surface). – The Dome: Is it a “Full Hemisphere” (like half a ball) or a “Flattened Dome” (like the photo, where it is a shallow curve)? – The Hole: A straight through-hole (non-countersunk) designed for thread, wire, or a small retaining pin. Production Method Manufacturing Note: Please be aware that Domed Magnets are Pressed-to-Shape. – It is not like standard discs which are sliced from a long cylinder. – This shape requires a specific Pressing Mold to create the curve before sintering. Tooling: If you need a custom size that matches an existing mold, there is no tooling fee. If you need a unique curvature, a one-time tooling fee may apply. Surface Coatings Zinc (Zn): – Similar to the photo. – A durable, cost-effective blue-grey finish. – Good for industrial buttons. Nickel (Ni-Cu-Ni): – A bright, mirror-like silver finish. – Best for luxury packaging. Gold / Rose Gold: – Highly recommended for buttons used on apparel or jewelry. Epoxy (Black): – Used for tactical gear or discreet closures. Applications Apparel: Sew-in magnetic buttons for jackets and bags (the hole allows for thread). Luxury Packaging: The visible “stud” on a high-end box closure. Electronics: A magnetic “pogo pin” contact point that needs to be smooth to the touch. Bearings: The hole and dome shape can act as a pivot point for a ball bearing. Ordering Guide: What We Need To provide a quote, please specify: 1). Base Diameter (OD): The width of the flat bottom. 2). Total Height (H): The height at the peak of the dome. 3). Hole Diameter (ID): The size of the center hole. 4). Dome Profile: Do you want a “High Dome” (ball shape) or “Low Dome” (button shape)? 5). Coating: Zinc, Nickel, or Gold?